LiPo Cylindrical Cells use a rechargeable lithium-ion polymer system in a cylindrical soft-pack form. Unlike conventional flat pouch cells, this construction is suited to products with narrow, elongated internal spaces. The confirmed product range covers approximately 5–25mm in diameter and capacities from 50mAh to 3300mAh.
The nominal voltage is 3.7V, with a common upper charging voltage of 4.2V.
Diameter-to-Capacity Selection
For devices shaped like pens, tubes or slim handheld products, the available diameter range provides a practical starting point for cell selection. Length and capacity may also be considered during project development, so the battery geometry can be discussed around the available internal compartment.
Product Specifications
|
Parameter |
Specification |
|
Cell System |
Rechargeable lithium-ion polymer |
|
Nominal Voltage |
3.7V |
|
Common Capacity |
50mAh–3300mAh |
|
Common Diameter |
Approx. 5–25mm |
|
Common Charging Limit |
4.2V |
Connection Configuration

Lead wires, connectors and protection boards may be configured according to assembly requirements. This is useful for buyers who need more than a bare cell and must match the battery connection to an existing PCB, device harness or internal layout.
Project customization can also cover diameter, length, capacity, lead arrangement and connector type. These variables should be confirmed from the actual installation space rather than selected independently.
Target Product Categories
Confirmed applications include electronic pens, wireless sensors, IoT devices, smart door locks, access-control products, portable audio equipment, electronic cigarettes and other electronics with tubular or elongated internal spaces.
The product category is therefore most relevant where physical shape is a major selection factor alongside voltage and capacity.
Customization Inquiry
When sourcing LiPo Cylindrical Cells, buyers should provide the available diameter and length, required capacity, connection method and device type. If the finished product requires specific leads, connectors or a protection-board arrangement, those details should be included during the technical discussion so the proposed cell configuration corresponds with the equipment layout.
Hot Tags: lipo cylindrical cells, China lipo cylindrical cells manufacturers, suppliers, factory, 21700 Cylindrical Cells, Energy Storage Cylindrical Battery, High Drain Cylindrical Battery, Li Ion Cylindrical Rechargeable Battery Pack, LiPo Cylindrical Cells, Rechargeable Cylindrical Lithium Battery






